CT1 Sealant & Construction Adhesive, Beige C-Tec

For all applications, including construction, engineering, roofing ,repair & maintenance, installation and marine repair CT1 replaces: Wood and P.U. adhesives, silicone sealants, sanitary silicone sealants, acrylic sealants and butyl rubber sealants.
As a universal adhesive CT1 bonds to all metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials, plastics (excluding PP, PE and PTFE).
On mirror applications apply in vertical strips (Not suitable for PP backed mirrors). CT1 works on natural stone (does not bleed through), polyester, polystyrene foam, wet surfaces, even under water.
CT1 Clear and Silver are used predominantly internally and all colours have become the professionals’ choice in large scale infrastructure projects.
CT1 can also be painted but must be fully cured and is paintable with all common water-based paints (not suitable with Alkyd Paints). For best results prior testing is recommended.

How To Use:
Before use ensure the cartridge has been stored at room temperature. Cut the Cartridge at the nose. Cut off nozzle at desired dimensions. Use a Mastic Gun. Apply on a clean, degreased surface. Finish off the joints with MULTISOLVE.

Technical Specification:
Application Temperature: +5ºC to +40ºC
Flow/Sag: <3mm
Skin Cure: 23ºC 50% R.H. 25 minutes ±5 min
Full Cure Time: 23ºC 50% R.H 2-3mm/12hrs, 3-6 mm/12-48hrs, 6-12mm/48-72hrs
Density ISO 1183-1: 1.58kg/Ltr
E-Modulus 100% (DIN 53504-S1A): 1.15 N/mm²
Volume Shrinkage After Cure: <3%
Hardness – DIN 53505: 55º Shore A
Tensile Strength: 2.90 N/mm²
(DIN 53504-S1A) (2.90 Mpa)
Substrate Bonding (Tensile Force): 3.07 N/mm² = 31.3 Kg/cm²
Thermal Stability: -40ºC to + 120ºC
Elongation At Rupture (DIN 53504-S1A): 385%
Frost Resistance During Transport: Up to -15ºC
Curing System: Neutral Cure