BFC – Black Fire Cement 1250°C, 310ml Vitcas

Black fire cement for domestic and commercial applications on fire bricks, fire grates, flue pipes, flue bricks, boilers and other applications subject to extreme heat. Offers excellent adhesion to fire bricks, block work, stone and clay ware. Resistant to 1250 C.

VITCAS  BFC –  Black Fire Cement is a smooth paste which sets rock hard when exposed to the air. Fire Cement has excellent adhesion to fire bricks, blockwork, stone, clayware and most metals. Primarily useful for minor repair work, cracks less than 5mm and seals to form smoke and gas tight joints.
Uses:
• Sealing of visible metal to metal joints • Sealing of visible joints between flue pipes and stoves in conjunction with stove rope • Installation or repair of ranges, fireplaces, ovens and boilers • Assembly of cast iron stove, cookers and ranges
Application:
Make sure the area is clean and that all dirt, dust, rust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied. Apply using a cartridge gun. The material will set at room temperatures but the time will be reduced by lighting the fire or applying heat, gradually increasing over a four hour period. After curing any fine cracks that may appear in the cement should be filled with the same material to ensure an air tight seal.

Technical Specification:

Product Group
Sealants
Size
310ml
Coverage of cartridge
Coverage: A guide to the amount of the material contained in one 310ml cartridge
Bead dia.(mm)
Length approx. (metres)
4
18
6
8
8
5
10
3
Color
Black
Consistency
Mastic
Indoor
Yes
Ready to Use
Yes
Temperature
1250°C /2280°F
Drying Time
12h / +20°C (+68°F)
Manufacturer
Vitcas
HS Tariff Code
3816009000